Quick 42
Car-O-Liner Group AB
40724, EN - rev. 8, 2017-09
77
over high obstacles e. g doorpost, you need to lift the bench in
order to not destroy the wheels.
5.4 Safety
5.4.1
Two Q16 on the same bench side on an
empty
unbolted
bench
Normally, when a bench is bolted to the floor, there are no problems to con-
nect two Q16 draw aligners on the same bench-side of an empty bench.
But when the bench is mobile (not bolted to the floor) it is forbidden to con-
nect two draw aligners to an empty bench and raise the lift as in ill. 1 and 2.
The bench might overturn during a lift and cause injuries.
It is only allowed to connect the two draw aligners in the front of the
empty mobile bench when raising the lift.
Along the bench sides
At the rear - drive-on side
Front
1.
2.
