manualshive.com logo in svg

Canon WFT-E9, Advanced User'S Manual

Share
Download
Canon WFT-E9 Advanced User'S Manual Download Page 5

Introduction

Before Using This Transmitter, Be Sure to Read the Following

To comply with local radio wave regulations, Canon offers five region-specific versions
of the transmitter (A, B, C, D, and E) in various areas around the world (see separate
sheet). For convenience, the transmitter in this manual is referred to as "WFT-E9",
without reference to the versions A, B, C, D, or E.
In this manual, the term "access point" indicates wireless LAN access points and
wireless LAN routers, etc., that relay a LAN connection.
These instructions should be followed only after setting up your LAN and FTP server
environments. For information about setting up the environments, refer to the
documentation provided with each device or contact the manufacturer.
Read the Camera's Advanced User Guide and familiarize yourself with operating the
camera before following the instructions on camera options.
This transmitter can be used with some CINEMA EOS cameras. For information on
supported cameras, contact your dealer or nearest Canon Service Center. For how to
use this product, refer to the "Guide for Canon Camcorders".

Support

Image transfer, remote shooting, or image viewing requires adequate knowledge of
configuring your LAN and FTP server. Canon cannot provide support for configuring LANs
or FTP servers.

Liability

Note that Canon cannot be held liable for any loss or damage to the transmitter from
erroneous network or FTP server settings. In addition, Canon cannot be held liable for
any other loss or damage caused by use of the transmitter.
When using LAN functions, establish appropriate security at your own risk and
discretion. Canon cannot be held liable for any loss or damage caused by unauthorized
access or other security breaches.

•

What You Can Do with the Transmitter

•

About This Manual

•

Safety Instructions

•

Handling Precautions

•

Nomenclature

•

Attaching to the Camera

5

Summary of Contents for WFT-E9














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands