Canon WFT-E9 Advanced User'S Manual Download Page 180

Page: 180 / 205

22: No response from DNS server

What to check on the transmitter

On the transmitter, the DNS address is set to [Manual setting]. Is this the correct
setting?

• If no DNS server is used, set the transmitter's DNS address setting to [

Disable

]

(

Did you set the correct IP address of the DNS server configured for the
transmitter?

• Make sure to set the IP address of the DNS server you will use for the transmitter

(

What to check on the DNS server

Is the power of the DNS server turned on?

• Turn on the DNS server.

Are the DNS server settings for IP addresses and the corresponding names
correct?

• On the DNS server, make sure IP addresses and the corresponding names are

entered correctly.

Is the DNS server working correctly?

• Check the DNS server settings to make sure it is working correctly as a DNS server.
• If applicable, ask your network administrator to ensure that the DNS server is

working.

What to check on the network as a whole

Does your network include a router or similar device that serves as a gateway?

• If applicable, obtain the network gateway address from your network administrator

and enter it on the transmitter (

• Make sure that the gateway address setting is correctly entered on all network

devices, including the transmitter.

180

Summary of Contents for WFT-E9














































































































































































































Search results

Summary of Contents for WFT-E9

Reviews:

Brands by name

Popular brands

Canon WFT-E9, Advanced User'S Manual

Search results

Summary of Contents for WFT-E9

Reviews:

Brands by name

Popular brands