Connecting with a Manual Connection
The network settings for the camera access point mode are configured manually. Set
[
SSID
], [
Channel setting
], and [
Encryption settings
] on each screen displayed.
1.
Select [Manual connection].
Select [
OK
] to proceed to the next screen.
2.
Enter the SSID (network name).
Press <
> to display the virtual keyboard (
), then enter the SSID.
After entering the SSID, press the <
> button.
Select [
OK
] to proceed to the next screen.
3.
Select the desired channel setting.
To specify the settings manually, select [
Manual setting
], then select
the setting by using <
>.
Select [
OK
] to establish a connection with the access point.
42
Summary of Contents for WFT-E9
