Adv
anced Oper
ations
7
99
MV Manager and its Other Functions and Settings
Other Advanced Settings
Camera Server Properties
Select a camera server and click the Properties button on the Toolbar to display the Properties
dialog box. Properties lets you make detailed camera server settings.
• You can select and alter the connection protocol from WV-TCP, WV-HTTP and Auto-Select.
Auto-Select is initially connects by WV-TCP and connects by WV-HTTP if there is a failure. The usual
setting is Auto-Select but WV-HTTP is set if the connection passes through a firewall (see p. 18).
• The timeout value when the camera server is connected by MV Station can be set with the "Connection
timeout" slide bar between 2 and 60 seconds in one second intervals.
• The upper limit for frame rate when the camera server is connected by MV Station can be set to a value
selected from the "Upper limit of framerate" box.
• Lets you confirm camera server address,
HTTP port (can be edited) and settings
page URL.
• Settings page can be opened with the
Open Setup Page button.
• The Administration Account button
produces a
display for
Administrator ID
and password.
These items can
be changed if there is a change in the
administration account.
• Lets you edit "Cameras server name" and
"Comment".
• Lets you confirm the type of camera server
and firmware version.
• View Test lets you confirm the images
from the cameras connected to the
camera server.
• Upgrade Firmware enables a remote
firmware upgrade to be performed (for
VB101 only).
• A list of monitoring screens in wich camera
servers are registered can be displayed for
confirmation.
●
General Tab
●
Network Tab
Summary of Contents for WebView LivescopeMV
