manualshive.com logo in svg

Canon WebView LivescopeMV, User Manual

Share
Download
Canon WebView LivescopeMV User Manual Download Page 113

Appendix

113

Error Messages

MV Manager Error Messages

Message

Cause

Action to 

be taken

(1) Network connection errors (DNS errors): Camera server registration error [01]

The specified network address could not be found.

Could not find the camera server. Make sure:
• the network address is correct.
• DNS setting is correct.

• Enter the network address correctly.
• Set the DNS correctly.

Message

Cause

Action to 

be taken

(2) Network connection error (time out): camera server registration error [02]

The connection to the specified network address timed out.

Could not find the camera server. Make sure:
• the network address is correct.
• the camera server is turned on.
• the camera server is connected properly to your network.

• Enter the network address correctly.
• Turn on power to the camera server.
• Connect the camera server to the network correctly.
• Extend the timeout time set in the Option.

Message

Cause

Action to 

be taken

(3) Failed to retrieve camera server description: Camera server registration error [03]

Camera server description could not be retrieved for reasons such as the connection 
target was not a camera server.

Could not find the camera server. Make sure:
• the camera server is compatible with WebView Livescope MV Ver.2.1.
• the network address is correct.
• the camera server is connected properly to your network.

• Connect to the camera server that is compatible with WebView Livescope MV Ver. 2.1.
• Enter the network address correctly.
• Connect the camera server to the network correctly.

Message

Cause

Action to 

be taken

(4) Connected to a camera server with old version of firmware: 

   camera server registration error [04]

The version of the firmware in the camera server is old.

Could not retrieve a description from the camera server. Make sure:
• the camera server is compatible with the WebView Livescope MV Ver.2.1.
• Firmware of VB101 is version 3.0 or later.

• Connect to a camera server that is compatible with WebView Livescope MV Ver. 2.1.
• Upgrade the VB101 firmware to 3.0 or later.

Summary of Contents for WebView LivescopeMV

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands