manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 235 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 235

235

ç

 Contents

Sending Favorite Images

Send only images tagged as favorites (

=

 169).

1 

Choose [Favorite Images].

 

●

Following step 2 in “Sending 

Multiple Images” (

=

 233), 

choose [Favorite Images] and 

press the [ ] button.

 

●

An image selection screen for 

favorites is displayed. If you 

prefer not to include an image, 

choose the image and press the 

[ ] button to remove [ ].

 

●

Press the [

] button.

 

●

Press the [ ][ ] buttons to 

choose [OK], and then press the 

[ ] button.

2 

Send the images.

 

●

Press the [ ][ ] buttons to 

choose [Send], and then press 

the [ ] button.

 

●

In step 1, [Favorite Images] is not available unless you have 
tagged images as favorites.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments