manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 337 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 337

337

ç

 Contents

Battery Pack NB-13L

Type:  

Rechargeable lithium-ion battery

Nominal Voltage:  

3.6 V DC

Nominal Capacity:  

1250 mAh

Charging Cycles:  

Approx. 300 times

Operating Temperatures:  0 – 40 °C (32 – 104 °F)

Battery Charger CB-2LH/CB-2LHE

Rated Input:  

 100 – 240 V AC (50/60 Hz) 

0.09 A (100 V) – 0.06 A (240 V)

Rated Output:  

4.2 V DC, 0.7 A

Charging Time:  

 Approx. 2 hr. 10 min.  

(when using NB-13L)

Operating Temperatures:  5 – 40 °C (41 – 104 °F)

 

●

Size, weight, and number of shots available are based on 

measurement guidelines of the Camera & Imaging Products 

Association (CIPA).

 

●

Under some shooting conditions, the number of shots and 

recording time may be less than mentioned above.

 

●

Number of shots/time with a fully charged battery pack.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments