manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 230 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 230

230

ç

 Contents

Sending Images to Another Camera

Connect two cameras via Wi-Fi and send images between them 

as follows.

 

●

Only Canon-brand cameras equipped with a Wi-Fi function can 

be connected to wirelessly. You cannot connect to a Canon-

brand camera that does not have a Wi-Fi function, even if it 

supports Eye-Fi/FlashAir cards.

1 

Access the Wi-Fi menu.

 

●

Press the [ ] button.

2 

Choose [ ].

 

●

Press the [ ][ ][ ][ ] buttons to 

choose [ ], and then press the 

[ ] button.

3 

Choose [Add a Device].

 

●

Press the [ ][ ] buttons to 

choose [Add a Device], and then 

press the [ ] button.

 

●

Follow steps 1 – 3 on the target 

camera too.

 

●

Camera connection information will 

be added when [Start connection 

on target camera] is displayed on 

both camera screens.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments