Canon PowerShot SX620 HS User Manual Download Page 231

Page: 231 / 347

231

Contents

Send an image.

●

Press the [ ][ ][ ][ ] buttons

to choose [Select and send], and

then press the [ ] button.

●

Press the [ ][ ] buttons to

choose [Select], and then press

the [ ] button.

●

Press the [ ][ ][ ][ ] buttons

to choose an image to send,

press the [ ] button to mark it as

selected ([ ]), and then press the

[

] button.

●

Press the [ ][ ] buttons to

choose [OK], and then press the

[ ] button.

●

Press the [ ][ ][ ][ ] buttons

to choose [Send], and then press

the [ ] button.

●

[Transfer completed] is displayed

after the image is sent, and

the image transfer screen is

displayed again.

●

To end the connection, press

the [

] button, press the

[ ][

] buttons on the confirmation

screen to choose [OK], and then

press the [ ] button.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 231 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: