218
ç
Contents
●
To determine the access point password, check on the access
point itself or refer to the user manual.
●
If no access points are detected even after you choose [Refresh]
in step 2 to update the list, choose [Manual Settings] in step 2
to complete access point settings manually. Follow on-screen
instructions and enter an SSID, security settings, and a password.
●
When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
password in step 3. To use the same password, press the [ ][ ]
buttons to choose [Next], and then press the [ ] button.
Previous Access Points
You can reconnect to any previous access points automatically
by following step 4 in “Using WPS-Compatible Access Points”
●
To connect to a device via an access point, confirm that
the target device is already connected to the access point,
and then follow the procedure from step 8 in “Using WPS-
●
To switch access points, choose [Switch Network] on the
screen displayed when you establish a connection, and then
either follow the procedure in “Using WPS-Compatible Access
