manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 151 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 151

151

ç

 Contents

Image Viewing Options

Magnifying Images

 Still Images 

 

Movies

1 

Magnify an image.

 

●

Moving the zoom lever toward [ ] 

will zoom in and magnify the image, 

and [

] is displayed. You can 

magnify images up to about 10x by 

continuing to hold the zoom lever.

 

●

The approximate position of the 

displayed area (1) is shown for 

reference.

 

●

To zoom out, move the zoom 

lever toward [

]. You can 

return to single-image display by 

continuing to hold it.

2 

Move the display position and 

switch images as needed.

 

●

To move the display position, 

press the [ ][ ][ ][ ] buttons.

 

●

While [

] is displayed, you 

can switch to [

] by pressing 

the [ ] button. To switch to other 

images while zoomed, press the 

[ ][ ] buttons. Press the [ ] button 

again to restore the original setting.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments