manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 88 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 88

88

ç

 Contents

Changing the IS Mode Settings

Deactivating Image Stabilization

 Still Images 

 Movies

When the camera is held still (as when shooting from a tripod), 

you should set image stabilization to [Off] to deactivate it.

1 

Access the setting screen.

 

●

Press the [

] button, 

choose [IS Settings] on the [ ] 

tab, and then press the [ ] button 

(

=

 52).

2 

Configure the setting.

 

●

Press the [ ][ ] buttons to 

choose [IS Mode], and then 

choose [Off] by pressing the 

[ ][ ] buttons.

Continuous

Optimal image stabilization for the shooting 

conditions is automatically applied (Intelligent IS) 

(

=

 69).

Off

Deactivates image stabilization.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments