Canon PowerShot SX620 HS User Manual Download Page 234

Page: 234 / 347

234

Contents

Selecting a Range

Choose [Select Range].

●

Following step 2 in “Sending

Multiple Images” (

233),

choose [Select Range] and press

the [ ] button.

Choose images.

●

Follow steps 2 – 3 in “Selecting

a Range” (

159) to specify

images.

●

To include movies, press the

[ ][ ][ ][ ] buttons to choose

[Incl. Movies], and then press the

[ ] button to mark the option as

selected ( ).

●

Press the [ ][ ][ ][ ] buttons to

choose [OK], and then press the

[ ] button.

Send the images.

●

Press the [ ][ ] buttons to

choose [Send], and then press

the [ ] button.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 234 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: