manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 80 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 80

80

ç

 Contents

Continuous Shooting

 Still Images 

 

Movies

In [

] mode, hold the shutter button all the way down to shoot 

continuously. 

For details on the continuous shooting speed, see “Camera” (

=

 330).

1 

Configure the setting.

 

●

Press the [ ] button, choose [ ] 

in the menu, and then choose 

[ ] (

=

 50).

 

●

Once the setting is complete, [ ] 

is displayed.

2 

Shoot.

 

●

Hold the shutter button all the way 

down to shoot continuously.

 

●

During continuous shooting, the focus, exposure, and colors are 

locked at the position/level determined when you pressed the 

shutter button halfway.

 

●

Cannot be used with the self-timer (

=

 75).

 

●

Shooting may stop momentarily or continuous shooting may slow 

down depending on shooting conditions, camera settings, and the 

zoom position.

 

●

As more shots are taken, shooting may slow down.

 

●

Shooting may slow down if the flash fires.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments