Canon PowerShot SX620 HS User Manual Download Page 158

Page: 158 / 347

158

Contents

Choosing Images Individually

Choose [Select].

●

Following step 2 in “Using the

Menu” (

157), choose [Select]

and press the [ ] button.

Choose an image.

●

Press the [ ][ ] buttons to

choose an image, and then press

the [ ] button. [ ] is displayed.

●

To cancel selection, press the [ ]

button again. [ ] is no longer

displayed.

●

Repeat this process to specify

other images.

Protect the image.

●

Press the [

] button.

A confirmation message is

displayed.

●

Press the [ ][ ] buttons to

choose [OK], and then press the

[ ] button.

●

Images will not be protected if you switch to Shooting mode or

turn the camera off before finishing the setup process in step 3.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 158 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: