Canon PowerShot SX620 HS User Manual Download Page 210

Page: 210 / 347

210

Contents

Configuring the Computer for a Wi-Fi Connection

(Windows Only)

On a computer running Windows, configure the following settings

before connecting the camera to the computer wirelessly.

Confirm that the computer is

connected to an access point.

●

For instructions on checking your

network connection, refer to the

computer user manual.

Configure the setting.

●

Click in the following order: [Start]

menu ► [All Programs] ► [Canon

Utilities] ► [CameraWindow] ►

[Wi-Fi connection setup].

●

In the application that opens,

follow the on-screen instructions

and configure the setting.

●

The following Windows settings are configured when you run the

utility in step 2.

Turn on media streaming.

This will enable the camera to see (find) the computer to access

via Wi-Fi.

Turn on network discovery.

This will enable the computer to see (find) the camera.

Turn on ICMP (Internet Control Message Protocol).

This allows you to check the network connection status.

Enable Universal Plug & Play (UPnP).

This will enable network devices to detect each other automatically.

●

Some security software may prevent you from completing the settings

as described here. Check the settings of your security software.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 210 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: