Canon PowerShot SX620 HS User Manual Download Page 275

Page: 275 / 347

275

Contents

Using the Software

To utilize the features of the following software, download the

software from the Canon website and install it on your computer.

●

CameraWindow

Import images to your computer

●

Image Transfer Utility

Set up Image Sync (

239) and receive images

●

Map Utility

Use a map to view GPS information that has been added to

images

●

To view and edit images on a computer, use preinstalled or
commonly available software compatible with images captured by
the camera.

Computer Connections via a Cable

Checking Your Computer Environment

For detailed software system requirements and compatibility

information (including support in new operating systems), visit the

Canon website.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 275 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: