Canon PowerShot G15 Page 75 User Manual Download

Page: 75 / 316

Using Face ID

Changing the Name or Birthday

Access the [Edit Profile] screen.

Following steps 1 – 3 on

74, choose

[Edit Profile] and press the <

> button.

Input changes.

Press the <

> buttons or turn the

> dial to choose an item, and follow

steps 4 – 5 on

71 to input changes.

•

Even if you change names in [Edit Profile], the names recorded in

previously shot images will remain the same.

•

You can use the included software to edit registered names. Some

characters entered with the included software may not display on the

camera, but will be correctly recorded in images.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands