Canon PowerShot G15 Page 29 User Manual Download

Page: 29 / 316

Trying the Camera Out

Erasing the Images

You can choose and erase unneeded images one by one. Be careful when

erasing images, because they cannot be recovered.

Choose an image to erase.

Press the <

> buttons or turn the

> dial to choose an image.

Erase the image.

Press the <

> button.

After [Erase?] is displayed, press the

> buttons or turn the <

> dial to

choose [Erase], and then press the <

button.

The current image is now erased.

To cancel erasure, press the <

buttons or turn the <

> dial to choose

[Cancel], and then press the <

button.

•

You can also erase all images at once (

197).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands