Canon PowerShot G15 User Manual Download Page 130

Page: 130 / 316

130

Image Brightness (Exposure Compensation)

Still Images

Adjusting the Setting

When the camera is set to [ ], maximum ISO speed can be specified in

a range of [ ] – [ ], and sensitivity can be specified in a range of three

levels.

Access the setting screen.

Press the <

> button, choose [ISO

Auto Settings] on the [

] tab, and then

press the <

> button (

48).

Configure the setting.

Choose a menu item to configure, and

then choose the desired option (

48).

•

You can also access the [ISO Auto Settings] screen when the ISO speed

setting screen (

129) is displayed, by pressing the <

> button.

Changing the Noise Reduction Level

(High ISO NR)

You can choose from 3 levels of noise reduction: [Standard], [High], [Low].

This function is especially effective when shooting at high ISO speeds.

Choose a noise reduction level.

Press the <

> button, choose [High

ISO NR] on the [

] tab, and then choose

the desired option (

48).

•

Not available with [

] or [

] (

159).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 130 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: