Canon PowerShot G15 User Manual Download Page 105

Page: 105 / 316

105

Image Effects (Creative Filters)

Playback Speed and Estimated Playback Time

(for One-Minute Clips)

Speed

Playback Time

Approx. 12 sec.

Approx. 6 sec.

Approx. 3 sec.

•

The zoom is not available when shooting movies. Be sure to set

the zoom before shooting.

•

Try taking some test shots first, to make sure you obtain the

desired results.

•

To switch the orientation of the frame to vertical, press the <

> buttons

in step 2. To move the frame, press the <

> buttons again. To return the

frame to horizontal orientation, press the <

> buttons.

•

Holding the camera vertically will change the orientation of the frame.

•

Movie image quality is [

] at an aspect ratio of [

] and [

] at an aspect

ratio of [

] (

80). These quality settings cannot be changed.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 105 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: