Canon PowerShot G15 User Manual Download Page 115

Page: 115 / 316

115

Special Modes for Other Purposes

Press the shutter button all the

way down.

The camera now enters shooting standby

mode, and [Look straight at camera to

start count down] is displayed.

The lamp blinks and the self-timer sound

is played.

Join the subjects in the

shooting area and look at the

camera.

After the camera detects a new face, the

lamp blinking and self-timer sound will

speed up. (When the flash fires, the lamp

will remain lit.) About two seconds later,

the camera will shoot.

To cancel shooting after you have

triggered the self-timer, press the

> button.

•

Even if your face is not detected after you join the others in the shooting

area, the camera will shoot about 15 seconds later.

•

To change the number of shots, press the <

> buttons after choosing

[

] in step 1. [Blink Detection] (

88) is only available for the final shot.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 115 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: