Canon PowerShot G15 User Manual Download Page 197

Page: 197 / 316

197

Erasing Images

Erasing All Images

You can erase all images at once. Be careful when erasing images,

because they cannot be recovered. However, protected images (

192)

cannot be erased.

Choosing a Selection Method

Access the setting screen.

Press the <

> button, and then

choose [Erase] on the [

] tab (

48).

Choose a selection method.

Choose a menu item and a setting as

desired (

48).

To return to the menu screen, press the

> button.

Choosing Images Individually

Choose [Select].

Following step 2 above, choose [Select]

and press the <

> button.

Choose an image.

Once you follow step 2 on

193 to

choose an image, [ ] is displayed.

To cancel selection, press the <

button again. [ ] is no longer displayed.

Repeat this process to specify other

images.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 197 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: