Canon PowerShot G15 User Manual Download Page 135

Page: 135 / 316

135

Color and Continuous Shooting

Still Images

Movies

Custom White Balance

For image colors that look natural under the light in your shot, adjust white

balance to suit the light source where you are shooting. Set the white

balance under the same light source that will illuminate your shot.

Follow the steps on

134 and choose

[ ] or [ ].

Aim the camera at a plain white subject,

so that the entire screen is white. Press

the <

> button.

The tint of the screen changes once the

white balance data has been recorded.

•

Colors may look unnatural if you change camera settings after

recording white balance data.

Still Images

Movies

Manually Correcting White Balance

You can manually correct white balance. This adjustment can match the

effect of using a commercially available color temperature conversion filter

or color-compensating filter.

Configure the setting.

Follow the steps on

134 to choose

the white balance option.

Turn the <

> dial to adjust the

correction level for B and A.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 135 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: