Canon PowerShot G15 Page 55 User Manual Download

Page: 55 / 316

Shooting (Smart Auto)

Shoot.

Shooting Still Images

Focus.

Press the shutter button halfway. The

camera beeps twice after focusing, and

AF frames are displayed to indicate

image areas in focus.

Several AF frames are displayed when

multiple areas are in focus.

If [Raise the flash] appears on the screen,

move the <

> switch to raise the flash.

It will fire when shooting. If you prefer not

to use the flash, push it down with your

finger, into the camera.

Shoot.

Press the shutter button all the way

down.

As the camera shoots, a shutter sound

is played, and in low-light conditions

when you have raised the flash, it fires

automatically.

Keep the camera still until the shutter

sound ends.

Your shot is only displayed until the

camera is ready to shoot again.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands