Canon PowerShot G15 Page 119 User Manual Download

Page: 119 / 316

119

Movies

Shooting Various Movies

Movies

Shooting Movies in <

> Mode

Enter <

> mode.

Set the mode dial to <

Black bars displayed on the top and

bottom edges of the screen indicate

image areas not recorded.

Configure the settings to suit

the movie (

290 – 299).

Shoot.

Press the movie button.

To stop movie recording, press the movie

button again.

Movies

Locking or Changing Image Brightness Before Shooting

Before shooting, you can lock the exposure or change it in 1/3-stop

increments within a range of –3 to +3.

Lock the exposure.

Press the < > button to lock the

exposure. The exposure shift bar is

displayed.

To unlock the exposure, press the < >

button again.

Adjust the exposure.

Turn the <

> dial to adjust the exposure,

as you watch the screen.

Shoot (

119).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands