Canon PowerShot G15 User Manual Download Page 249

Page: 249 / 316

249

Using Optional Accessories

•

The filter adapter and a lens hood cannot be attached to the camera at the

same time.

Still Images

Using a Remote Switch (Sold Separately)

An optional Remote Switch RS-60E3 can be used to avoid camera shake

that may otherwise occur when pressing the shutter button directly. This

optional accessory is convenient when shooting at slow shutter speeds.

Connect the remote switch.

Make sure the camera is off.

Open the terminal cover and insert the

remote switch plug.

Shoot.

To shoot, press the release button on the

remote switch.

•

Bulb photography (long exposures) is not supported.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 249 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: