Canon PowerShot G15 Page 215 User Manual Download

Page: 215 / 316

215

Editing Movies

Editing Movie Digest Clips

Individual chapters (

94) recorded in [ ] mode can be erased, as

needed. Be careful when erasing chapters, because they cannot be

recovered.

Select the chapter to erase.

Follow steps 1 – 5 on

174 – 175

to choose a movie recorded in [ ]

mode, and then press the <

> button

repeatedly to access the screen at left.

Choose the chapter to erase by pressing

the <

> buttons or turning the <

dial, and then choosing [ ] or [ ].

Choose [ ].

Following steps 1 – 3 on

174 – 175,

choose [ ] and press the <

> button.

The selected chapter is played back

repeatedly.

Confirm erasure.

Press the <

> buttons or turn the

> dial to choose [OK], and then press

the <

> button.

The chapter is erased, and the clip is

overwritten.

•

[ ] is not displayed if you select a chapter when the camera is connected to

a printer.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands