Canon PowerShot G15 Page 74 User Manual Download

Page: 74 / 316

Using Face ID

Checking and Editing Registered Information

Checking Registered Face ID Information

Access the [Check/Edit Info]

screen.

Following step 1 on

69, choose

[Check/Edit Info] and press the <

button.

Choose a person to check.

Press the <

> buttons or

turn the <

> dial to choose a person,

and then press the <

> button.

Check the registered

information.

Press the <

> buttons or turn the

> dial to choose an item, and then

press the <

> button.

Check the registered information.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands