Canon OMNERA 400A, Operator'S Manual

Page: 45 / 156

Operator´s Manual
0073-095-418-EN Rev. 5.1 OMNERA®
2020-09-25 Page 39
3.1.5 Selection of Technique Mode
There are three different technique modes available that are selected by pushing the Techni-
que mode selection button. The selected mode is highlighted and the pop-up window closes
automatically.
1 2 3
Fig. 3-4 Technique mode selection
1. AEC mode
2. mAs mode
3. mA/ms mode
Depending on what mode is active, different parameters will be available. Parameters not
available for selection will be grayed out, see the
mAs selection button in Fig. 3-5 mAs selec-
tion button grayed out , below.
In AEC mode the value that will be used as back-up value (ms, mAs or fixed), is indicated
with the text AEC Backup .
CAUTION!
For avoiding unnecessary radiation, make sure that the AEC back-up values are prop-
erly defined.
AEC
ms
6,0
mA
200
kV
150
AEC Backup
Density
1
+
mAs
5
mAs
5
Fig. 3-5 mAs selection button grayed out
For more detailed information about the different technique modes, please see Operator’s
Manual for Canon single console CXDI NE.
User Interface
Overhead Tube Crane