OMNERA®
0073-095-418-EN Rev. 5.1
Operator´s Manual
Page 20
2020-09-25
2.8.3 Table
Possible squeeze hazard areas are indicated in the figure.
Squeezing hazard can occur between the:
• table top (1) and the top of the imaging unit (4); when the table top (1) is in the outer posi-
tion (Y-direction) or moving in a longitudinal direction (X-direction).
• table top (1) and the imaging unit rail (6); when the table top (1) is in the outer position (Y-
direction).
• imaging unit (4) and the cover (5); when the imaging unit is moving in a longitudinal direc-
tion (X-direction).
• column (7) and the footplate (8); when the column (7) is moving downwards (Z-direction).
• cover (2) and the column cover foot (3); when the column (7) is moving downwards (Z-
direction).
Z
Y
X
0
6
7
8
1 2 3 4 5
002010.eps
Fig. 2-4
1. Table top (X/Y/Z)
2. Cover
3. Column cover foot
4. Imaging unit (X)
5. Cover
6. Imaging unit rail
7. Column (Z)
8. Footplate
WARNING!
Squeezing hazards may occur between the table top and the imaging unit or the imag-
ing unit rail.
Summary of Contents for OMNERA 400A
Page 1: ...Technical Publication Operator s Manual 0073 095 418 EN Rev 5 1 ...
Page 140: ...OMNERA 0073 095 418 EN Rev 5 1 Operator s Manual Page 134 2020 09 25 Waste Disposal ...
Page 150: ...OMNERA 0073 095 418 EN Rev 5 1 Operator s Manual Page 144 2020 09 25 Appendix A Glossary ...
Page 156: ......
