Canon OMNERA 400A, Operator'S Manual

Page: 111 / 156

Operator´s Manual
0073-095-418-EN Rev. 5.1 OMNERA®
2020-09-25 Page 105
4. Push the detector until the hold-backs are set. Then the detector is in the correct position.
Chargeable detectors will start charging when set in this position.
Hold-back
Latch
Fig. 4-23
CAUTION!
It is important that the hold-backs lock outside the detector end. Failure to position
the detector in the proper position, will lead to incorrect images.
Note!
If the detector or the detector holder is not properly inserted, a warning symbol will be shown
at the display.
Operating the System
Detector, Wallstand