OMNERA®
0073-095-418-EN Rev. 5.1
Operator´s Manual
Page 102
2020-09-25
4.9.1.2 Change between Portrait and Landscape
The method of rotating the detector in the detector holder, is as follows:
1. To rotate the detector by 90
o,
, in the step 2 of “Method to set the detector”, hold the lower
side of the detector and turn it from the below, clockwise or anti-clockwise (2) while pulling
the latch upward or downward of the detector tray (1) in the direction of the arrow.
Note!
• To set the detector, pull the latch:
- upward at upper position of the tray.
- downward at the center of the tray.
• Depending on left— or right—operated Wallstand, the location of the detector tray and po-
sition of button and latches is different.
Centered or Top Rotation of the Detector
In the landscape position, there is a choice between having the detector rotated through the
detector center or through the detector top.
(2) Top position landscape
(1) Center position
landscape
Portrait
Fig. 4-21 Rotating the detector
Summary of Contents for OMNERA 400A
Page 1: ...Technical Publication Operator s Manual 0073 095 418 EN Rev 5 1 ...
Page 140: ...OMNERA 0073 095 418 EN Rev 5 1 Operator s Manual Page 134 2020 09 25 Waste Disposal ...
Page 150: ...OMNERA 0073 095 418 EN Rev 5 1 Operator s Manual Page 144 2020 09 25 Appendix A Glossary ...
Page 156: ......
