<Question 3> Is the printer's
(Wi-Fi) indicator on?
On
To <Question 4>
Off
The printer is not connected by wireless LAN.
Change to a wireless LAN connection.
"Switching Between Wireless LAN and Wired LAN for the Connection (LBP7110Cw Only)"
<Question 4> Can the computer connect to the Internet?
Can connect
To <Question 5>
Cannot connect
Complete the settings of the computer and wireless LAN access point.
Properly connect the power cord and LAN cable of the wireless LAN access point.
Turn on the wireless LAN access point.
If the computer still cannot connect to the Internet, restart all equipment, wait for a while,
and then try connecting to the Internet again.
For details on the connection method or the procedure for restarting the equipment,
see the instruction manual of each device or contact the manufacturer.
<Question 5> Do the installation locations for the printer and wireless LAN access point meet
the following conditions?
The distance between the printer and the wireless LAN access point is less than 50 m. (The distance may vary
depending on the transmission speed and environmental conditions.)
There is no wall or other obstruction between the printer and wireless LAN access point.
The printer and wireless LAN access point are not located near a microwave oven or refrigerator.
㻠㻝㻠㻌㻛㻌㻡㻝㻠
Summary of Contents for LBP7100Cn
