Canon LBP7100Cn User Manual Download Page 425

Page: 425 / 514

0F40-07U

Perform one of the following solutions according to the cause.

<Cause 1> The LAN cable is not connected properly or broken.

Solution 1

Remove the LAN cable once, then connect it again.

Solution 2

Replace the LAN cable with another one, then connect it.

<Cause 2> The cable is connected to the UP-LINK (cascade) port on the hub.

Solution 1

Connect the LAN cable to the port on the hub with an " X " mark.

Solution 2

If the hub has an UP-LINK (cascade) switch, switch to " X ".

<Cause 3> A cross LAN cable is being used.

Solution 1

Replace the cable with a straight LAN cable.

Solution 2

Connect the cross LAN cable to the UP-LINK (cascade) port on the hub. If the hub has an UP-LINK
(cascade) switch, switch to the " = " side.

<Cause 4> Cannot communicate with the hub.

Solution 1

Make sure that the power of the hub is on.

Solution 2

Specify the transmission speed and transfer mode of the printer to match those of the connected hub.

"Specifying the Wired LAN Communication Mode and Transmission Speed"

<Cause 5> The hardware of the printer is in an abnormal condition.

Solution

Contact your local authorized Canon dealer to request service.

<Cause 6> If the printer is connected by wireless LAN (LBP7110Cw Only)

Solution

Change to a wired LAN connection.

"Switching Between Wireless LAN and Wired LAN for the Connection (LBP7110Cw Only)"

NOTE

You cannot use a wired LAN and wireless LAN at the same time

When using the printer with a wireless LAN connection, do not connect a LAN cable to the printer. This may result in
malfunction.

All the Indicators on the Network Interface Are Off

㻠㻞㻡㻌㻛㻌㻡㻝㻠

Summary of Contents for LBP7100Cn



































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP7100Cn

Reviews:

Related manuals for LBP7100Cn

Brands by name

Popular brands

Canon LBP7100Cn, User Manual

Search results

Summary of Contents for LBP7100Cn

Reviews:

Related manuals for LBP7100Cn

Brands by name

Popular brands