Canon LBP7100Cn User Manual Download Page 308

Page: 308 / 514

0F40-065

There are the following two ways to start the Remote UI.

Starting the Remote UI from the Printer Status Window
Starting the Remote UI Directly from a Web Browser

Before starting the Remote UI, see "

Attention (Remote UI)

Starting the Remote UI from the Printer Status Window

Click [

] in the Windows task tray, and then select the printer name.

Click [

] (Remote UI).

If you cannot click [

] (Remote UI)

Check the following points.

The printer and computer are connected properly via a network.
The printer is turned ON.

(1) Select the login mode.

(2) Click [Log In].

Starting the Remote UI

㻟㻜㻤㻌㻛㻌㻡㻝㻠

Summary of Contents for LBP7100Cn



































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP7100Cn

Reviews:

Related manuals for LBP7100Cn

Brands by name

Popular brands

Canon LBP7100Cn, User Manual

Search results

Summary of Contents for LBP7100Cn

Reviews:

Related manuals for LBP7100Cn

Brands by name

Popular brands