Canon LBP7100Cn, User Manual

Page: 411 / 514

Selected To <Question 10>
Not selected Select the correct port.
The port to be used
cannot be found.
Create a port.
"Configuring and Changing the Port"
The IP address
was changed.
For MFNP Port
To <Question 10>
The port does not have to be changed because a new IP address is detected
automatically when the printer and computer are on the same subnet.
For Standard TCP/IP Port
Change the port.
" Configuring and Changing the Port "
<Question 10> Check the following points.
The printer is specified as the default printer.
The TCP/IP protocol is running.
The users who can print are not restricted.
" Restricting the Users Who Can Print and Specify Settings "
If printing does not work, proceed to <Question 11>.
<Question 11> Connect the printer and computer directly with the cross-type
*
LAN cable.
*
This is a LAN cable which is used to connect a printer and computer directly without a hub (LAN network).
If printing does not work or if you cannot prepare a cross-type LAN cable, proceed to <Question 12>.
<Question 12> Install the printer driver again.
"Uninstalling the Printer Driver"
"Installing the Printer Driver"
If printing does not work, proceed to <Question 13>.
<Question 13> Can you print from another computer (network connection)?
㻠㻝㻝㻌㻛㻌㻡㻝㻠