manualshive.com logo in svg

Canon imageRUNNER 2545, Service Manual

The Canon imageRUNNER 2545 is a versatile multifunction printer that offers high-quality printing, copying, and scanning capabilities. With its compact design and user-friendly interface, this device provides seamless performance for any office environment. Enhance your printing experience by accessing the service manual digest, available for free download at manualshive.com.

Share
Download
background image

0

0

0-10

0-10

 

 

List of Functions(PRINT CST) ----------------------------------------------------------8-37

#NETWORK ------------------------------------------------------------------------8-38

Confirmation of contents of CA certificate -------------------------------------------8-38

#CODEC ----------------------------------------------------------------------------8-38

Configuration --------------------------------------------------------------------------------8-38
Details ----------------------------------------------------------------------------------------8-38

#SYSTEM ---------------------------------------------------------------------------8-38

Configuration --------------------------------------------------------------------------------8-38
Details of Bit Switch -----------------------------------------------------------------------8-38
Details of System Numeric --------------------------------------------------------------8-39

#ACC ---------------------------------------------------------------------------------8-39

Configuration --------------------------------------------------------------------------------8-39

#COUNTER ------------------------------------------------------------------------8-40

Counters -------------------------------------------------------------------------------------8-40
Clearing Counters -------------------------------------------------------------------------8-40

#LMS ---------------------------------------------------------------------------------8-41

Configuration --------------------------------------------------------------------------------8-41
Outline ----------------------------------------------------------------------------------------8-41
Details ----------------------------------------------------------------------------------------8-41
Method of confirming license option --------------------------------------------------8-42
Inactivity of the transmitted license----------------------------------------------------8-42
Erasing a License--------------------------------------------------------------------------8-43

#E-RDS ------------------------------------------------------------------------------8-44

Configuration --------------------------------------------------------------------------------8-44

#REPORT ---------------------------------------------------------------------------8-45

Configuration --------------------------------------------------------------------------------8-45
Details ----------------------------------------------------------------------------------------8-45

#DOWNLOAD ---------------------------------------------------------------------8-49

Download ------------------------------------------------------------------------------------8-49

#CLEAR -----------------------------------------------------------------------------8-50

Configuration --------------------------------------------------------------------------------8-50

#DISPLAY ---------------------------------------------------------------------------8-50

Configuration --------------------------------------------------------------------------------8-50

#ROM --------------------------------------------------------------------------------8-51

Configuration --------------------------------------------------------------------------------8-51

#TEST MODE ---------------------------------------------------------------------8-51

Outline ----------------------------------------------------------------------------------------8-51
Configuration --------------------------------------------------------------------------------8-51

Details ----------------------------------------------------------------------------------------8-52

9

  Installation

How to check this Installation Procedure -------------------------------9-2

When Using the parts included in the package ---------------------------- 9-2
Symbols in the Illustration ------------------------------------------------------- 9-2

Making Pre-Checks -----------------------------------------------------------9-2

Selecting the Site of Installation ------------------------------------------------ 9-2

Points to Make Before Installation ----------------------------------------9-3

Option Installation Sequence ----------------------------------------------9-3

Checking the Contents ------------------------------------------------------9-4

Unpacking and Installation Procedure -----------------------------------9-6

Unpacking the Machine and Removing the Packaging Materials ----- 9-6
Installing the Toner Bottle -------------------------------------------------------- 9-8
Installing the Drum Unit ---------------------------------------------------------- 9-9
Connecting the cord -------------------------------------------------------------- 9-11
Stirring Toner -----------------------------------------------------------------------9-12
Installing Trays ---------------------------------------------------------------------9-12
Setting the Cassettes ------------------------------------------------------------9-13
Installing Other Parts -------------------------------------------------------------9-14
Checking the Print Image  ------------------------------------------------------9-17
Checking the Connection to the Network -----------------------------------9-17
Setting the Date and Time ------------------------------------------------------9-17
Setting the Cassette Heater (if equipped with the cassette heater) --9-17

Document Tray-J1 Installation Procedure ---------------------------- 9-18

Points to Note before Installation ---------------------------------------------9-18
Checking the Contents ----------------------------------------------------------9-18
Installation Procedure ------------------------------------------------------------9-19

In case of iR 2545/2535 Series --------------------------------------------------------9-19
In case of iR 2530/2525/2520 Series -------------------------------------------------9-20
When installing with “USB Application 3-Port Interface Kit-A1” simultaneously -
9-20

Card Reader Installation Procedure ------------------------------------ 9-21

Checking the Contents ----------------------------------------------------------9-21
Points to Note Before Installation ---------------------------------------------9-22

Turning Main Power OFF  ---------------------------------------------------------------9-22

Summary of Contents for imageRUNNER 2545











































































































































































































































































































































































Reviews:

No comments

Related manuals for imageRUNNER 2545

Xyron FPO User Manual preview
FPO
Brand: Xyron Pages: 6
Xerox 7700 Setup Manual preview
7700
Brand: Xerox Pages: 2
Xerox 7700 Setup And Quick Reference Manual preview
7700
Brand: Xerox Pages: 40
Xerox 7700 Advanced Features And Troubleshooting Manual preview
7700
Brand: Xerox Pages: 69
Xerox 7700 Install Manual preview
7700
Brand: Xerox Pages: 42
Partner RP-100-300II User Manual preview
RP-100-300II
Brand: Partner Pages: 9
UBI EasyCoder 501 SA Service Manual preview
EasyCoder 501 SA
Brand: UBI Pages: 214
UBI EasyCoder 401 Technical Manual preview
EasyCoder 401
Brand: UBI Pages: 64
IBM 5218 Setup Procedures preview
5218
Brand: IBM Pages: 60
Oce VarioLink 3622 User Manual preview
VarioLink 3622
Brand: Oce Pages: 209
Kyocera KM-1635 Service Manual preview
KM-1635
Brand: Kyocera Pages: 13
Riso RP3100AW User Manual preview
RP3100AW
Brand: Riso Pages: 208
U-Line H-8093 Manual preview
H-8093
Brand: U-Line Pages: 33
Velleman 3DPEN1 User Manual preview
3DPEN1
Brand: Velleman Pages: 44
Oki C7350n User Manual preview
C7350n
Brand: Oki Pages: 187
idp SMART-21S User Manual preview
SMART-21S
Brand: idp Pages: 63
Ricoh PRO C7200S Operator'S Manual preview
PRO C7200S
Brand: Ricoh Pages: 552
Tektronix Phaser 220 Reference Manual preview
Phaser 220
Brand: Tektronix Pages: 178

Brands by name

Popular brands

Load more brands