Canon imageRUNNER 2545 Service Manual Download Page 281

Page: 281 / 362

9-14

6) Load paper in the cassette, and then push in the cassette.

7) For the double-cassette (standard) model, load paper in the other 550-sheet cassette and push in

the cassette in the same manner as for the first cassette.

8) When a cassette pedestal is used, set up the cassettes with reference to the Cassette Pedestal

Installation Procedure.

Installing Other Parts

a.Attaching Handle Covers

1) Attach the two supplied handle covers.

F-9-27

Summary of Contents for imageRUNNER 2545











































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands

Canon imageRUNNER 2545, Service Manual

Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands