Canon imageRUNNER 2545 Service Manual Download Page 308

Page: 308 / 362

9-41

6) Fix the controller plate with 3 screws (TP, M3x6).

7) Fix the rear cover (right) with 3 screws (RS-tight, M3x8).

8) Connect the power plug of the host machine to the power outlet and

turn its main power switch ON.

9) Checking the Connection

9-1) Have the service mode display by pressing the following keys in order:

>2key>8key>

In response, [#SSSW] appears.

9-2) Use left or right cursor [< / >] key and press [OK] when [REPORT] has appeared.

9-3) Use left or right cursor [< / >] key and press [OK] when [REPORT OUTPUT] has appeared.

9-4) Use left or right cursor [< / >] key and press [OK] when [SPEC LIST] has appeared.

9-5) SPEC REPORT is printed out. Confirm TOTAL MEMORY is [512MB] on the report.

Summary of Contents for imageRUNNER 2545











































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands

Canon imageRUNNER 2545, Service Manual

Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands