Canon imageRUNNER 2545, Service Manual

Page: 157 / 362

4
4
4-49
4-49
Parts Replacement and Cleaning > PCB > Removing the Fixing Motor (M2) > Replacement Procedure
Parts Replacement and Cleaning > PCB > Removing the Fixing Motor (M2) > Replacement Procedure
Removing the Main Motor (M1)
■ Replacement Procedure
1) Remove the rear cover (right).( “Removing the Rear Cover (Right)”(page 4-21). )
2) Remove the rear cover (left).( “Removing the Rear Cover (Left)”(page 4-22). )
3) Remove the right cover (upper rear).( “Removing the Rear Right Cover (Upper)”(page
4-22). )
4) Remove the HVT PCB.( “Removing the HVT PCB”(page 4-45). )
5) Remove the main motor.
- 4 screws
- 1 connector
x1
x4
F-4-109
Removing the Fixing Motor (M2)
■ Replacement Procedure
1) Remove the rear cover (right).( “Removing the Rear Cover (Right)”(page 4-21). )
2) Remove the rear cover (left).( “Removing the Rear Cover (Left)”(page 4-22). )
3) Remove the right cover (upper rear).( “Removing the Rear Right Cover (Upper)”(page
4-22). )
4) Remove the support plate.
- 1 relay connector
- 1 connector
- 1 screw
x1
x1
NOTE:
Because there is a screw on the backside of the relay connector, remove the relay
connector earlier.
F-4-110