Canon imageRUNNER 2545, Service Manual

Page: 94 / 362

2
2
2-68
2-68
Technology > Embedded RDS > E-RDS Setup > Network settings
Technology > Embedded RDS > E-RDS Setup > Network settings
E-RDS Setup
To monitor a Copier/ MFP with e-Maintenance/ imageWARE Remote, the following settings
are required.
■
Advance preparations
(1) Advance confirmation
Confirm with the UGW administrator that the device to be monitored with e-Maintenance/
imageWARE Remote is registered in the UGW.
(2) Advance preparations
Interview the user's system administrator in advance to find out the following information
about the network.
Information item 1
IP address settings
• Automatic setting (DHCP, RARP, BOOTP)
• Manual setting IP address, subnet mask and gateway address to be set
Information item 2
Is there a DNS server in use?
If there is a DNS server in use, find out the following.
• Primary DNS server address
• Secondary DNS server address
Information item 3
Is there a proxy server?
If there is a proxy server in use, find out the following.
• Proxy server address
• Port No. for proxy server
Information item 4
Is proxy server authentication required?
If proxy server authentication is required, find out the following.
• User name and password required for proxy authentication
■
Network settings
Based on the results of the information obtained in (2) Advance preparations, make the iR
device network related settings in accordance with the following procedures.
● IP Address Settings
a. Move on to Settings/ Registration > System Settings > Network Settings > TCP/IP Settings
> IPv4 Settings > IP Address Settings.
b. Set the IP address, based on the information obtained under (2) Advance preparations,
Information item 1, described above.
• For automatic acquisition, select from [DHCP], [RARP], [BOOTP].
• For manual setting, set the following by numeric keys.
• IP Address Example) 172. 001. 016. 200
• Subnet Mask Example) 255. 255. 255. 0
• Gateway Address Example) 172. 001. 016. 254
F-2-93
F-2-94