Canon imageRUNNER 2545, Service Manual

Page: 167 / 362

4
4
4-59
4-59
Parts Replacement and Cleaning > PCB > Removing the Front Door Switch (SW2) > Replacement Procedure
Parts Replacement and Cleaning > PCB > Removing the Front Door Switch (SW2) > Replacement Procedure
Removing the Front Door Switch (SW2)
■ Replacement Procedure
1) Remove the support cover.( “Removing the Support Cover”(page 4-14). )
2) Remove the tonner supply cover.( “Removing the Toner Supply Cover”(page 4-19). )
3) Remove the waste toner container.( “Removing the Waste Toner Container”(page 4-37). )
4) Remove the box tray.
- 1 box tray shaft
- 1 screw
x1
CAUTION:
When reinstalling the box tray, installation so that the positioning boss is satisfied in a
spring.
F-4-135
F-4-136
NOTE:
When reinstalling the box tray shaft, fit the insertion part into the hole.
5) Remove the waste toner release lever.
6) Remove the internal cover (right).
- 4 screws
x4
F-4-137
F-4-138