Canon imageRUNNER 2545 Service Manual Download Page 133

Page: 133 / 362

4-25

Parts Replacement and Cleaning > Main Units/Parts > Removing the Right Cover Assembly

7) Remove the connection cable.
2 connectors (The machine without the No.2 delivery unit does not have the upper

connector.)

CAUTION:
Be sure to disconnect the upper connector after releasing the harness from the clamp
to prevent breaking of wire

8) Remove one screw.

9)Remove two screws.

F-4-47

F-4-48

10)Remove the right cover assembly.

F-4-49

Summary of Contents for imageRUNNER 2545











































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands

Canon imageRUNNER 2545, Service Manual

Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands