Canon imageRUNNER 2545, Service Manual

Page: 278 / 362

9
9
9-11
9-11
Connecting the cord
MEMO:
Install an optionally available
document glass cover or the
DADF on the machine. If the
model is the one without the
DADF, install a document cover
glass.
For how to install the DADF,
refer to the DADF Installation
Procedure.
1) Insert the connector of the supplied Power cord into the AC inlet.
F-9-20
2) Install the supplied power cord clamp with the supplied screw *.
*: Besides AU model, use the TP screw (M3 x 6). For AU model, use the stepped screw.
Insert the left leg of the power cord clamp into the machine frame.
x1
F-9-21
3) Plug the supplied Power cord in the wall outlet.
4) Peel off the protective seal from the operation panel.
5) Turn on the main power switch.
CAUTION:
The specified power must be supplied. (Rated
voltage ±10% at the rated current)