Canon imageRUNNER 2320, Reference Manual

Page: 183 / 292

Finisher-U2 5-7
Op
ti
ona
l Eq
uipm
ent
5
Finishing Modes
The Finisher-U2 is equipped with the following finishing modes: Staple,
Group, and Collate.
NOTE
•
The output trays move downward as the stack of paper that is output increases in
quantity and thickness. Once the output trays have reached their stacking limit, printing
stops temporarily. Remove all of the prints from the output trays, and printing resumes.
•
For more information on the finishing modes, see Chapter 2, “Advanced Operations,“ in
the
Copying Guide or Chapter 1, “Using the Machine as a Printer,“ in the UFR II Printer
Guide .
■
Staple Mode
The prints are automatically collated into sets arranged in page order and stapled. Prints
are stapled in the following places:
CAUTION
•
Do not place anything other than
output paper in the trays of the
finisher, as this may damage the
trays.
•
Do not place anything under the
trays of the finisher, as this may
damage the trays.
CAUTION
Do not place your hand in the roller
or the part of the tray where stapling
is performed, as this may result in
personal injury.