Canon imagePRESS C7000VP Series, Trouble Shooting Information

Page: 52 / 137

Trouble Shooting Information for C7000VP series
Page 52
Rev. 2.0
2010/09/17
2.7
When importing paper database via RUI, parameters are not carried
over

Description
When selecting ‘Basic’ under Additional Functions > System Settings > Device Information
Delivery Settings > Paper Information settings, all parameters are not carried over.
- All the information: including revised information is carried over
- Basic: Only ‘Name’, ‘Basis weight’, ‘Type’, ‘Color’, ‘Creep (Displacement) Correct.’ are
carried over.

Field Remedy
Select ‘All the information’ under Additional Functions > System Settings > Device Information
Delivery Settings > Paper Information settings.
2.8
Full adjustment for auto gradation cannot be completed

Description
There are some reported instances from the field where full adjustment for auto ration was
unable to complete with a message ‘Auto gradation is suspended. Start adjustment again.’,
although quick adjustment was completed normally.

Cause
The setting values for all the items of P-PASCAL were ‘0’ in service mode COPIER > Adjust.

Field Remedy
1. Check the setting values in P-PASCAL, and if they are ‘0’ input the values by referring to the
service label attached to the back side of the front cover or input the values by referring to
P-Print which had previously been output. Then, turn the main power switch OFF/ON.
2. Perform full adjustment for auto gradation once again.