Canon imagePRESS C7000VP Series, Trouble Shooting Information

Page: 131 / 137

Trouble Shooting Information for C7000VP series
Page 131
Rev. 2.0
2010/09/17
8. Loosen the screw [17] and move the tracking detection arm adjusting plate [18] to the
position 0.5mm below the mark-off line [19] made in Step 5); then tighten the screw [17]
again. Then, in the same manner as Step 7), swing the tracking detection arm to check to
make sure that it does not contact the separation roller.
9. To prevent the screw [17] from being loosened by vibration, fix it with a bonding material.
This is the end of the adjustment.
[17]
[19]
[18]