Canon imagePRESS C7000VP Series, Trouble Shooting Information

Page: 110 / 137

Trouble Shooting Information for C7000VP series
Page 110
Rev. 2.0
2010/09/17
3. Fine Adjusting the Zoom Ratio of the Image
Depending on the paper type, the heat generated by the fixing assembly may cause the paper
to expand or shrink slightly. In this case, images may also be enlarged or reduced accordingly.
Note: If you extensively enlarge or reduce the image in the direction that is perpendicular to the
feeding direction, copying or printing speed may slow down.
3.1. Adjusting under [Zoom Fine Adjustment]
1. Press [Zoom Fine Adjustment].
2. Set the enlargement/reduction ratio (%) you want by referring to any of the output images >
press [OK].
[a]: Enlarges or reduces the image in the direction that is parallel to the feeding direction
according to the inputted ratio.
[b]: Enlarges or reduces the image in the direction that is perpendicular to the feeding
direction according to the inputted ratio.
3.2. Adjusting under [Test Print Value Entry]
1. Press [Test Print Value Entry].
2. Input the length of the test print paper on both [Front Side] and [Back Side] > press [OK].
The length of the test print is 360.0mm x 270.0 mm. For example, if the measured length of [a]
is 360.4 mm, enter 360.4. The difference in length (0.4mm in this case) is automatically
reduced, so that the image is printed in the correct size.
[a]: Enter the measured length of the side that is parallel to the feeding direction.
[b]: Enter the measured length of the side that is perpendicular to the feeding direction.